PRODUCTS

INSULATED METAL
PANELS

CONTINUOUS LINE PANEL

As our legacy product, CLP (continuous line panel) panels were a versatile insulated building panel used for a broad range of industrial, commercial and retail cold storage, food processing and controlled temperature applications. 

CLP panels are thermally efficient, strong, light weight and easy to install using a “foam-to-foam, tongue and groove” joint. The panels came in a variety of thicknesses between two and ten inches and in lengths up to 45 feet, allowing for longer spans.

EPS INSULATED METAL PANELS

EPS panels and continuous line panels are interchangeable terms for an identical product. EPS panel is the common industry term. Continuous line panel describes how the panel is produced. Whichever term you encounter, they refer to the same solution.

LONGER SPANS

A longer panel is simply fewer panels. Across a large interior envelope that meant fewer joints to seal, fewer transitions to detail and less structural support to carry the wall. The panels were also light, roughly 2.15 pounds per square foot at four inches, so crews could handle them without heavy equipment. Fewer pieces and lighter pieces added up to shorter install schedules and lower installed cost, which is where most of the savings on an EPS panel job actually came from.

WHERE THE NAME CAME FROM

Continuous line panels took their name from how they were manufactured. Rather than being pressed one panel at a time, the panel was laminated as a single uninterrupted run and cut to length at the end of the line. That process is what made lengths up to 45 feet practical, and it is the reason these panels could span farther than a conventionally produced panel without additional structural support.

THERMAL PERFROMANCE

The expanded polystyrene core delivered an R-value of 4.40 per inch at a 20°F mean temperature and 4.15 per inch at 55°F. With thicknesses running from two to ten inches, the same panel system covered everything from a mechanical room partition to a low temperature envelope, and the tongue and groove joint stayed the same across the range.

OTHER SOLUTIONS

CLP is a legacy Custom Cooler product. We no longer manufacture, stock or supply continuous line panels, including replacement panels for existing systems.
For new projects we build walk-in coolers, walk-in freezers and the components and parts that go in them.

Tell us about your project and we will point you to the right solution.

OVERVIEW

Applications

EPS insulated metal panels are ideally suited for interior applications such as:

FAQs

Frequently Asked Questions

Don’t see your question? Our team is happy to help.

Is a continuous line panel the same as an insulated metal panel?

Continuous line describes how the panel is manufactured. Insulated metal panel describes what it is. Most continuous line panels are insulated metal panels, but not every insulated metal panel is made on a continuous line.

Polyurethane gives you more R-value per inch, so you reach a given thermal performance in a thinner panel. EPS costs less and performs consistently over time. For long spans at warehouse scale, EPS is often the economical choice. For tight thermal envelopes and thinner walls, urethane performs better.

Yes. IMPs are used for exterior walls and roofs routinely. Exterior use puts more demand on the finish, the joint sealing and the fastener detail.